Grease basert på syntetisk olje

---

RENOLIT HLT / RHF
Ageing-resistant, thermally and mechanically stable, lithium soap greases based on polyalphaolefins. Good elastomer compatibility. -40/-50 °C to +140 °C.

---

RENOLIT UNITEMP 2
Fully-synthetic, high-temperature grease. Particularly resistant to ageing, water resistant and work-stable. Suitable for a wide range of temperatures between -50 °C and +180 °C, even up to +220 °C for short periods.

---

RENOLIT AS
Hydrocarbon-resistant, tacky, sealing grease. Is not washed out by mineral oils, gasoline and some chlorinated hydrocarbons. -20 °C to +140 °C.

---

RENOLIT S 2
Special, ester-based grease for high-speed rolling bearings and/or low temperatures. -60 °C to +120 °C.

---

RENOLIT JP 1619
Mechanically-stable, low temperature grease. Also suitable for high-speed bearings. NLGI grade 1 -50 °C to +120 °C.

---

RENOLIT GL 1
Low-friction and low-wear special grease with noise-suppressing properties. For all types of plain and rolling bearings as well as gearboxes, guide rails, sliding roofs, door brakes, screws, etc., -30 °C to +140 °C. Approvals BMW and OPEL. Also available in spray cans as RENAX GLEITSPRAY.

---

RENOLIT FOL 2
Special grease containing PTFE for the lubrication of very low-speed bearing surfaces such as sliding films in the construction industry. Approved by the German Materials Testing Institute. -40 °C to +140 °C.

---

RENOLIT LX-PG 2
Polyglycol-based grease with a lithium complex thickener. Good elastomer compatibility (EPDM), good EP properties, suitable for low temperatures and resistant to cutting fluids. -40 °C to +160 °C. Approved by VW TL 52150.

---

RENOLIT ST-V 2
Special grease for life-time lubrication of plain and roller bearings in a wide temperature range, specially suitable for wheel bearings of trucks, -40 °C to +180 °C.

---

RENOLIT LST 0 / LST 00
Semi-fluid, NLGI grade 0 and 00 grease based on polyglycols and a lithium thickener. Good elastomer compatibility (EPDM), good EP properties, suitable for low temperatures and resistant to cutting fluids. -30 °C to +140 °C.

---

RENOLIT DISCOR R EP 000
Special semi-fluid grease for gears and central lubrication systems at low temperatures, -60 °C to +100 °C.

---