Biologisk nedbrytbare


HYDRAULIKKOLJE
PLANTOHYD N SERIES

Vegetable oil-based hydraulic fluids with additives to improve oxidation resistance and ageing stability. Rapidly biodegradable. Temperature range: -27 °C to +70 °C. Exceed ISO 15380 HETG specifications. VDMA 24 568 change-over recommendations should be observed.


PLANTOHYD S SERIES

Synthetic ester-based general lubricating and hydraulic oils. Temperature range: -35 °C to +90 °C. Rapidly biodegradable. Exceed ISO 15380 HEES. VDMA 24 569 change-over recommendations should be observed. Approved by BOSCH REXROTH AG, BRUENINGHAUS and SAUER-SUNDSTRAND.


PLANTOHYD S-NWG SERIES

Environmentally friendly hydraulic oils based on special, synthetic esters. The PLANTOHYD S-NWG series fulfil the requirements of ISO 15380 HEES and German legal requirements concerning non-water-polluting substances. VDMA 24 569 change-over recommendations should be observed.


PLANTOLUBE POLAR S SERIES

Hydraulic oils based on saturated synthetic esters. Environmentally friendly because rapidly biodegradable. Extremely low pour point. Universally applicable at temperatures ranging from -55 °C to +90 °C. Exceed ISO 15380 HEES. VDMA 24 569 change-over recommendations should be observed. Approved by well-known gear manufacturers.


PLANTOSYN 46 HVI

Hydraulic oil based on fully-saturated synthetic esters. Environmentally friendly because rapidly biodegradable. Suitable for all hydraulic systems. Outstanding EP performance. Tested and approved by BOSCH REXROTH AG, BRUENINGHAUS and SAUER-SUNDSTRAND. Surpasses ISO 15380 HEES 46. VDMA 24 569 change-over recommendations should be observed.


GEAR OG SMØREOLJE 

PLANTOGEAR S SERIES

Rapidly biodegradable and environmentally friendly, high-performance gear oils based on synthetic esters. Comply with DIN 51 517-3 CLP. Exceed ISO 15380 HEES. VDMA 24 569 change-over recommendations should be observed. Excellent protection against micro-pitting. Approved by well-known gear manufacturers.


VANGEOLJE

PLANTOLUBE CGLP 68/220 S

Rapidly biodegradable and environmentally friendly slideway oils based on synthetic esters. Good EP and anti-wear performance. Very good friction coefficients. These slideway oils are perfectly matched to PLANTOCUT and PLANTOHYD machine tool lubricants.


KLEBRIGE OLJER

PLANTOTAC HV SERIES

Premium-quality, vegetable oil-based tacky lubricants. Environmentally friendly because rapidly biodegradable. Good viscosity-temperature behaviour, tackiness, wear protection and film stability. Suitable for use as total-loss lubricants on timber sawing grids, joints and guide pins.


FORM & FORSKALINGS OLJE

PLANTO SCHALUNGSÖL N

Universal, vegetable-based mould-release oil. Rapidly biodegradable. Awarded the "Blue Angel" environmental seal.


PLANTO SCHALUNGSÖL S

Universal, ester-based mould-release oil. Rapidly biodegradable. Awarded the German "Blue Angel" environmental seal.


COMPRESSOR OLJE 

PLANTOLUBE SC 46 S

Rapidly biodegradable, high-performance oil for screw compressors. Based on saturated synthetic esters. PLANTOLUBE SC 46 S offers excellent ageing stability, good air release properties and low evaporation losses.


 

Kontakt oss

 Kontakt oss

Fuchs Offshore Lubricants AS
Tlf: +47 55 39 26 20
Fax: +47 55 33 02 01
E-post: post@fuchs.no